How to clean a showerhead with vinegar and baking soda

How to clean a showerhead with vinegar and baking soda. The slow flow of water from your showerhead indicates that it needs to be cleaned.

There are many cleaning chemicals that are used to clean the showerhead but a chemical solution may also damage the showerhead.

So it’s good to look for alternatives to the chemical solution, we have some remedies easily available at home, such as baking soda and vinegar.

Baking soda is known as a good cleaning agent, similarly, vinegar is also the hero of cleaning solutions. To boost up the cleaning process, you can a fewer drops of dishwashing liquid soap.

How to clean a showerhead with vinegar and baking sodaHow to clean a showerhead with vinegar and baking soda

Mix three cups white vinegar with one cup baking soda to clean the showerhead. You can do it by taking one large bowl that can accumulate your showerhead. First add white vinegar then add baking soda, and wait for the reaction to end. Now soak the showerhead and leave it overnight. After the waiting period is over rub the showerhead with a brush and rinse under warm water thoroughly.

Now dry the showerhead and reconnect it, and make sure it is working properly.

Vinegar and baking soda

Vinegar is also known as a hero of homemade cleaning solutions. A mixture of vinegar with baking soda effectively cleans the showerhead.

  • Take a bucket or container that can easily submerge the showerhead.
  • Take white vinegar and pour three cups into the container. Add a cup of baking soda after the white vinegar. This will initiate a reaction between baking soda and white vinegar.
  • Wait for at least 10 minutes when the bubbling finished.
  • Take the showerhead and put it inside the solution and check if it’s a little bit bigger. Depending on the size of the showerhead add more vinegar and baking soda.
  • The showerhead should sink completely into the solution. Wait for at least 2 hours. The waiting time depends on the intensity of the dirt accumulated in the showerhead. Leave overnight for better cleaning results.
  • Use a toothbrush and rub the showerhead gently to remove the buildup. Rub the all-accessible areas to make the showerhead clean.
  • Remove the showerhead and clean it with warm water to get rid of any filth.
  • Wipe up the wetness from the showerhead’s surface using a paper towel or soft cloth. Clean and dry it properly before reconnecting it to the fixture.
  • Check that everything is in working condition by turning on the water.

Vinegar, baking soda and dishwashing soap

The mixture or solution of vinegar and baking soda with fewer drops of dishwashing soap removes the buildup from the shower surface.

Take 3 cups of white vinegar and 1 cup of baking soda, and add fewer drops of a good washing liquid. Mix to prepare the solution and soak the showerhead inside the solution.

Now take a soft brush to remove the buildup and rinse with warm water to clean the showerhead. Reconnect and check if it’s working properly.

How to clean shower head rubber nozzles?

Many of the showerheads come up with if your shower head has rubber nozzles where water come out and you wonder how to clean rubber nozzles.

Take a soft brush and rub the nozzles to clean any deposits. You can use dishwashing soap to effectively clean the nozzles. After rubbing the rubber nozzles, rinse the rubber nozzles under warm water to remove deposits.

Conclusion

It’s important to keep your showerhead clean for perfect running. The slow water flow indicates that the showerhead is clogged due to some buildup and minerals deposits. Clean your showerhead with vinegar and baking soda to unclog it and to bring it back to active status again.

Related Guides

Leave a Comment